Hi Guys,
We recently upgraded a 2960G(Only doing L2) that was hitting ~500Mb/sec on one
port, and we were seeing 40,000+ output drops (5Min) - Since the swap to the
4948, we see zero output drops. Is the difference in performance purely buffer
size? I *think* the 2960 has 1.9Mb (Per ASIC) and the 4948 has 16Mb (total?)?
Cheers.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
