Thanks - Ive already tried removing portchan, defaulting int, following the guide mentioned below, and I still get the EC-5-CANNOT_BUNDLE2 error. I dont have access to the 4500X's atm..Ill send through Int configs as soon as I can.
> Subject: Re: [c-nsp] 4500-X VSS %EC-5-CANNOT_BUNDLE2 > To: [email protected]; [email protected]; > [email protected] > From: [email protected] > Date: Fri, 8 Mar 2013 06:12:02 +0000 > > 'sho run in te1/16' > > Sounds like you have dtp on it currently and it doesn't like that... Try > defaulting the interface first? > > > ------Original Message------ > From: CiscoNSP List > Sender: [email protected] > To: [email protected] > Subject: [c-nsp] 4500-X VSS %EC-5-CANNOT_BUNDLE2 > Sent: Mar 7, 2013 9:39 PM > > > > Hi Guys, > > Following this guide: https://supportforums.cisco.com/docs/DOC-29472 and when > trying to add the physical Int to the portchan, I get: > > %EC-5-CANNOT_BUNDLE2: TE1/16 is not compatible with PO5 and will be suspended > (trunk mode of TE1/16 is dynamic, P05 is trunk) > > Config has been entered as per the above doc - Any suggestions as to why this > is happening? > > Both switches are running: > cat4500-e-ios-promupgrade-150-1r-SG7cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin > > > Cheers. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
