You can use the command "show platform hardware qfp active datapath utilization" to see current QFP/ESP utilization.
>From an SNMP perspective you're looking for CISCO-ENTITY-QFP-MIB http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1mib3.html#wp2129069 which will be OID 1.3.6.1.4.1.9.9.715 http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.715&translate=Translate&submitValue=SUBMIT Hope this helps. -Pete On Tue, Mar 19, 2013 at 11:39 AM, marc williams <[email protected]> wrote: > Is it possible to monitor the performance of the ESP in the ASR 1000 > series. > We have the asr 1002-F andThe ESP is listed at 2.5Gbps. We would like to > see when were getting close to that. > > -- > Marc > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
