All, Is anyone running 15.1(1)SY (or an earlier 15.x release) on a 6500/Sup720? I tried to upgrade a box this morning from 12.2(33)SXJ3 to 15.1(1)SY, and all worked okay except one line card (a WS-X6748-SFP):
router#show mod 2 Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD082xxxxx Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 2 000e.83xx.xxb8 to 000e.83xx.xxcf 2.1 Unknown Unknown Other Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 2 Distributed Forwarding Card WS-F6700-DFC3B SAL105xxxxx 4.5 Other Mod Online Diag Status ---- ------------------- 2 Unknown After a while, it logged: Mar 23 07:16:51.876 UTC: %ONLINE-SP-6-REGN_TIMER: Module 2, Proc. 0. Failed to bring online because of registration timer eve sm(cygnus_oir_bay slot2), running yes, state wait_til_online Last transition recorded: (power_on_ok)-> wait_til_online (reset_timer_online)-> wait_til_online (powered_off)-> shutdown_pc (pc_powered_off)-> powered_off (operator_power_on)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online (reset_timer_online)-> wait_til_online Mar 23 07:16:51.876 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Module Failed SCP dnld) Downgrading the Sup720 back to 12.2(33)SXJ3 caused the card to boot and run fine again. I can't seem to find anything about this in the release notes, or via google. Given that it works fine on 12.2, I don't think it's failing hardware. Could it be a hardware revision issue? (Other cards in this chassis are 2.4+) Thanks in advance, Simon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
