Hello,
We are trying to change the administrative distance on one of the OSPF
neighbors of our router and no matter what it is set to, the value does not
seem to change.
#sh ip route x.x.0.102
Thu Apr 4 02:36:05.122
Routing entry for x.x.0.102/32
Known via "ospf 12345", distance 110, metric 2, type intra area
Installed Apr 4 02:14:55.059 for 00:21:10
Routing Descriptor Blocks
x.x.25.19, from x.x.0.102, via Bundle-Ether1
Route metric is 2
x.x.25.34, from x.x.0.102, via Bundle-Ether2
Route metric is 2
No advertising protos.
#sh route ospf | incl x.x.0.102
Thu Apr 4 03:31:36.554
O x.x.0.102/32 [110/2] via x.x.25.34, 01:16:40, Bundle-Ether2
The issue here is that we are trying to avoid sending a majority of our
traffic through Bundle-Ether2 which it seems OSPF has decided is the best
Path. The 0.102 address is a loopback interface of a neighbor (6500b)
directly connected to Bundle-Ether1, where Bundle-Ether2 is connected to
6500a with less capacity on it's links. This is causing the links on
bundle2 to get saturated at peak times.
XR-bundle2--->6500a--->6500b
XR-bundle1--->6500b--->6500a
Configured XR router:
router ospf 12345
log adjacency changes
distance 120 x.x.25.34 0.0.0.0
Is this a bug or am I going about this all wrong?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
