We tried to use the 5k(A) and it worked. is the only way to get it working on the 5k(B) is a remote SPAN? Eventually the plan is to dual home the 4506 back to the 5k's but we currently can't do that.
TIA Scott On Fri, Apr 5, 2013 at 12:57 AM, Виктор Моисеев <[email protected]> wrote: > We are using something like this on 5K. > We have some VPC to monitor on pair of 5Ks. > > monitor session 1 > source interface port-channel1012 rx > destination interface Ethernet1/40 > no shut > > interface Ethernet1/40 > switchport monitor > > Are you sure that vlan9 traffic actually flows through 5k(B)? > From your picture I see 4506 single-homed to 5k(A) only. > If so, you might want to use RemoteSPAN. > If 4506 dual-homed to both NXs via VPC > you can monitor port-channels on both of N5K. > > > Best regards, > Victor Moiseev > > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of Scott Voll > > Sent: Friday, April 05, 2013 2:31 AM > > To: [email protected] > > Subject: [c-nsp] SPAN on Nexus 5k > > > > I'm trying to setup a SPAN on a 5k and it's not working as I would have > > thought. > > > > Topology: > > > > Servers on vlan 9 connected to 4506E <-10g-> 5k(A) <-Peer Link-> 5k(B). > > > > I'm trying to setup a monitor session on 5k(B) that monitors vlan 9 but > > I'm > > not getting any traffic. > > > > Vlan 9 is allowed on all the trunks. > > > > Am I missing something here? > > > > Thanks > > > > Scott > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
