"Loc ac err" on 7609.. ? I'm thinking g1/18 on 7609 is L3 int, and in order for vpws l2vpn pw to come up, ac (g1/18) must be converted to L2 interface
perhaps try on 7609... Conf t Default interface GigabitEthernet1/18 interface GigabitEthernet1/18 switchport description TEST_MPLS_PSEUDOWIRE load-interval 30 speed 1000 no keepalive no cdp enable service instance 20 ethernet encapsulation untagged bridge-domain 20 7609-S# Apr 8 12:24:24.681: XC VPWS[3900001A:172.18.0.17:20]: Alarm: 0x0 Apr 8 12:24:24.681: XC: MPLS peer 172.18.0.17 vcid 20, VC state DOWN, Loc AC Err -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Antonis Vosdoganis Sent: Monday, April 08, 2013 8:51 AM To: [email protected] Subject: [c-nsp] Cisco 7609-S - ME3600 / xconnect up - ac down Hello We are trying to set up a pseudowire connection between a Cisco 7609-S and ME3600. When xconnect is applied on physical interface or service instance there is no problem. When we are moving to interface vlan xconnect is up but ac is down. Cisco 7609 is using a 7600-ES+20G3CXL gigabit port NOT RSP720 and IOS version c7600rsp72043-advipservicesk9-mz.153-1.S.bin ME3600 is using IOS version me360x-universalk9-mz.153-1.S1.bin We have successfully set up the same scenario with 2 ME3600. Please check attached files for sample configurations and show - debugs commands. Regards Antonis. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
