Dear George The 7609 has 2 egress interfaces one L3 and one L2 with SVI (we need to span some vlans). These interfaces are mpls enabled backbone links. Also we have hardcoded the mpls router id to use loopback interface. 7609's loopback interface was reachable through L2/SVI interface and since you claimed that must be only L3 i have change the path and the VC was finally up. I would like to thank you all for your help.
Many Thanks Antonis. On Mon, Apr 8, 2013 at 6:23 PM, George Giannousopoulos <[email protected]>wrote: > Hello, > > Are the two devices connected back to back? > In order to use SVI based EoMPLS from 7600 to me3600x, you need the egress > interface on the 7600 towards the me3600x to be on a ES+ module AND it must > be configured as L3 ptp. > > Is that your case? > > George > > > On Mon, Apr 8, 2013 at 4:51 PM, Antonis Vosdoganis <[email protected]>wrote: > >> Hello >> >> We are trying to set up a pseudowire connection between a Cisco 7609-S >> and >> ME3600. >> >> When xconnect is applied on physical interface or service instance there >> is >> no problem. >> >> When we are moving to interface vlan xconnect is up but ac is down. >> >> Cisco 7609 is using a 7600-ES+20G3CXL gigabit port NOT RSP720 and IOS >> version c7600rsp72043-advipservicesk9-mz.153-1.S.bin >> >> ME3600 is using IOS version me360x-universalk9-mz.153-1.S1.bin >> >> We have successfully set up the same scenario with 2 ME3600. >> >> Please check attached files for sample configurations and show - debugs >> commands. >> >> Regards >> >> Antonis. >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
