>From my experience, 15.2 is riddled with bugs. First thing I'd do is get off >of 15.2. 15.3(2)S seems to be working well for me so far.
-- Sent from my mobile device On 2013-04-12, at 7:19 PM, Eric A Louie <[email protected]> wrote: > Platform ME-3600X, IOS 15.2 > > I've got point to multipoint connection on the GigE interface, a base radio > and > 2 sector radios. I've been trying to get both a VRF SVI and a non-VRF SVI > to > work over that same physical interface. > > > Here's what I've done so far: > 1. Created a no switchport physical interface and had multiple IP addresses > on > the interface. I can have different IPs on the different sector radios. > That > works. > 2. Created a VLAN 100 interface with multiple IPs and switchport access on > the > physical interface. That works > 3. Created a VLAN 100 interface with VRF and multiple IP, and service > instance > and bridge-domain on the physical interface. works if I use encap default or > encap untagged. Does not work if I encap dot1q 100 > 4. Created VLAN 100 with VRF and VLAN 101 without. 2 service instances both > with bridge-domains, but the only service instance that works is the encap > default or encap untagged. > > So it seems I have tagging issues - Can I eliminate the VLAN tag for the > service > instance that isn't working? If so, how? > > Thanks > Eric > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
