Aah yes your right I totally forgot about that.
adam From: Pete Lumbis [mailto:[email protected]] Sent: Thursday, April 25, 2013 3:48 PM To: Adam Vitkovsky Cc: [email protected] Subject: Re: [c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis blind With regards to the IIH padding, disabling padding only disables the padding after a neighbor is discovered. You need to tack on the "always" keyword to disable all padding. This may be hidden as it was only recently exposed (but it's been there for a long time). On Thu, Apr 25, 2013 at 6:01 AM, Adam Vitkovsky <[email protected]> wrote: Hi folks, I got unidirectional link for CLNS on a routed port-channel between me3600x-cx and ASR9k. There's only one GigE in the bundle on both ends. ASR9k sees IIHs in and out however on CX I do not see IIHs from ASR9k. Also I have noticed that CX pads the IIH to the full MTU even though the interface is configured as p2p and I have hello padding disabled for p2p interfaces. I have the same setup towards me3600x with no issues (well BFD is not functional) Everything runs smooth on physical interfaces, CX also disables IIH padding CX is 15.2(4)S2 X is 15.3(1)S I guess I have to try with 15.2(4)S3 on CX adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
