Hi Adam, Did the knob fixed the issue? Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> [Think before you print.] Think before you print. This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: adam vitkovsky <[email protected]<mailto:[email protected]>> Date: Thursday, April 25, 2013 7:07 AM To: Pete Lumbis <[email protected]<mailto:[email protected]>> Cc: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis blind Aah yes your right I totally forgot about that. adam From: Pete Lumbis [mailto:[email protected]] Sent: Thursday, April 25, 2013 3:48 PM To: Adam Vitkovsky Cc: [email protected]<mailto:[email protected]> Subject: Re: [c-nsp] me3600X-CX 15.2(4)S2 GigE port-channel to ASR9k - isis blind With regards to the IIH padding, disabling padding only disables the padding after a neighbor is discovered. You need to tack on the "always" keyword to disable all padding. This may be hidden as it was only recently exposed (but it's been there for a long time). On Thu, Apr 25, 2013 at 6:01 AM, Adam Vitkovsky <[email protected]<mailto:[email protected]>> wrote: Hi folks, I got unidirectional link for CLNS on a routed port-channel between me3600x-cx and ASR9k. There's only one GigE in the bundle on both ends. ASR9k sees IIHs in and out however on CX I do not see IIHs from ASR9k. Also I have noticed that CX pads the IIH to the full MTU even though the interface is configured as p2p and I have hello padding disabled for p2p interfaces. I have the same setup towards me3600x with no issues (well BFD is not functional) Everything runs smooth on physical interfaces, CX also disables IIH padding CX is 15.2(4)S2 X is 15.3(1)S I guess I have to try with 15.2(4)S3 on CX adam _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
