Hello Scott, Where did you find that 2951 can do up to 300Mbps?
Per this document: http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c45_556315.pdf The upper router of ISR2 line can do up to 350Mbps, and that's a 3945E. I did attached a document, with specs for different lines ISR2 and ASR, maybe you can find it useful. I take into consideration especially the "Recommend WAN Access Speed" field from the attached document. HTH, Calin ---- On Fri, 24 May 2013 16:53:25 +0200 Scott Voll wrote ---- >Sorry for the cross post. But I wasn't sure which was the better forum to >post in. > >I currently have a 2951 running voice, Security, VPN, and Data. it works >really great for our current needs. BUT we are going to start pushing more >that 300mbps and this router is only rated for 296mbps per the spec sheet. > >What is the next move up to support up to gig throughput and still support >ZBFW, GRE, IPSEC, PRI's for Voice, and QoS at Gig speeds? > >Do I have to separate out my WAN (use an ASR) and then continue with the >2951 for my security / voice? > >What are my options? > >Thanks > >Scott >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
