Hi, > show interface vfc 2 >vfc2 is trunking > Bound interface is Ethernet1/25 > Hardware is Ethernet > Port WWN is 20:01:54:7f:ee:8e:ac:7f > Admin port mode is F, trunk mode is on > snmp link state traps are enabled > Port mode is TF > Port vsan is 11 > Trunk vsans (admin allowed and active) (1-2,11) > Trunk vsans (up) () > --- i think in this place should be Trunk vsans >(up) (11) > Trunk vsans (isolated) () > Trunk vsans (initializing) (1-2,11) i think something wrong on Nexus, can you show output from :
show vsan memebership , show vlan fcoe show policymap system? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
