On 05/06/2013 15:07, Harry Hambi wrote: > Been having some strange issues recently regarding auto negotiate. The > switches in questions are 6509 running IOS 12.2<17r>SX3, and 3750 stack > IOS 12.2.<53r>SE1. Some pc's connected to ports on these switches will > not get an IP address when configured to auto..
12.2(17r) is the boot-rom version. You can get the operating software revision using: Router#show version | i s72033 > changed the Network Adapter Link Speed from Auto Neg to 100 meg Full > ...pc aquires IP, > Changed to 100 meg Half, pc works. > Port states show no errors, tried changing ports on switch no change. > Any ideas appreciated. I could check the cabling. I.e. with a proper cable certification tester. If that's not the problem it could be crappy drivers or crappy ethernet cards. Cisco autoneg works pretty well on both c6500 and c3750 hardware these days (although it is completely broken on several older units). Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
