Thanks for the answers. I understand that routers do something about automatic address assignment (I believe known as SAA). This is not DHCPv6.... but rather simply the router telling the hosts it's prefix and the hosts assign the host portion to that. Question: would/did you all go that route for end station addressing OR did you do dhcpv6 ? if so, why one over the other?
Aaron -----Original Message----- From: Jay Ford [mailto:[email protected]] Sent: Wednesday, June 05, 2013 4:00 PM To: Aaron Cc: [email protected]; [email protected] Subject: Re: [c-nsp] ipv6 On Wed, 5 Jun 2013, Aaron wrote: > There seems to be so many ways to do ipv6..(I'm not clear on what to > use and why to use it and when to use it..) > > I work for an isp of about 30,000 customers. > - Ftth > - Dsl > - Cable modem > > What is the best way to migrate my customers to IPv6 with zero impact > (meaning, all internet and services are still reachable when done > moving to > ipv6) ? > > I don't need configs and technical details, just a technique or > technology answer for now will suffice to get my moving in a research direction. The best general approach is to add native IPv6 alongside IPv4 & plan to run that way for several years. Most clients will now do the right thing when presented with working IPv4 & IPv6 connectivity, so your job is to add working native IPv6. You should try very hard to avoid NATed IPv6, so if your IPv4 is NATed now you'll have to keep that difference in mind. This sequence worked well for us: o devise an IPv6 address plan o get IPv6 address space from ARIN o establish native IPv6 connectivity upstream o enable IPv6 in your routed net o enable IPv6 to net-related services (DNS, NTP, syslog, SNMP...) o enable IPv6 on the net staff desktop net, so they can & in fact have to use it every day o educate users, at least those who know what IP is o enable IPv6 to some "early adopter" users o enable IPv6 to the rest of the users It really wasn't that hard for us to roll out native IPv6. It took a while, but that's a reason to get started rather than delay. There are some things which might not yet be up to IPv6, mainly things which try to be extra smart (firewalls, load balancers, home gateways...) & things which are dumb (printers, embedded control devices, home gateways...). Yes, I know I put home gateways in both lists. ;^) Most things in the middle of the device spectrum behave pretty well these days. ________________________________________________________________________ Jay Ford, Network Engineering Group, Information Technology Services University of Iowa, Iowa City, IA 52242 email: [email protected], phone: 319-335-5555, fax: 319-335-2951 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
