Check the link below http://eng-mssk.blogspot.com/2012/10/mpls-l3-vpn-6pe-ebgp-pe-ce-routing.html
BR, Mohammad > Date: Fri, 21 Jun 2013 13:57:16 +0300 > From: hilmy...@gmail.com > To: cisco-nsp@puck.nether.net > Subject: [c-nsp] IPv6 Deployment / 6PE > > Dear Friends, > I am working on IPv6 deployment at our Backbone. > Our network design is as below: > > PEs --- MP-BGP ---RR ( address-family vpnv4 ) > RR------ BGP-----IGW ( address-family ipv4 ) > > what i understand is : > > - Add address family IPv6 at PEs : > address-family ipv6 > neighbor x.x.x.x activate ( x.x.x.x is IPv4 address of RR ) > neighbor x.x.x.x send-community both > exit-address-family > > - Add address family IPv6 at RR > address-family ipv6 > neighbor y.y.y.y send-community both (y.y.y.y is IPv4 address of PE ) > neighbor y.y.y.y route-reflector-client > neighbor y.y.y.y.y activate > > - Add address-family vpnv6 ( RR-----IGW ) > > This is the plan , i dont know if i am missing something. > > I have Full BGP table IPv4+ IPv6 from my UP LINKS , in order to deploy IPv6 > so i need MP-BGP ( RR--- IGW ). > We can say MP-BGP ( vpnv4 ) will carry IPv6 packets as a label across IPv4 > MPLS Backone. > Thanks in advance for sharing info. > > Regards, > Ahmed > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/