Configure the load balancing algorithm for the portchannel.
e.g.
switch(config)# port-channel load-balance ethernet {destination-ip |
destination-mac | destination-port | source-dest-ip | source-dest-mac |
source-dest-port | source-ip | source-mac | source-port}
Cisco uses source-dest-mac as the default
On Wed, 17 Jul 2013 23:28:45 +0300, Ahmed Hilmy wrote:
Hello Friends,
Can i configure a static route for prefix x.x.x.x/y to different
destinations a.a.a.a & b.b.b.b ?
Router 1 -------- Router 2 directly connected.
I want to do this thing because i have port-chanel between R1 - R1
with two
interfaces, one of them is carrying 990 Mb but 2nd one is only
carrying 60
Mb.
Config is identical on bundle members.
Please advice.
Regards,
Ahmed
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
