Hi,
Have a G1, with one active Gig port in a portchan (Second member is currently
disconnected, but is also a Gig port on the G1) - No other ports are configured
as member ports.
Gi0/1 (Active member) has an mtu of 1998 - Portchan doesnt have an mtu
configured (So is defaulting to 1500)
Attempting to change the mtu on the portchan, I get the following:
(config)#interface Port-channel1(config-if)#mtu 1998 % At least
one member of the channel group 1 is not a 2FE port adapter
Any suggestions why this is happening?
And I assume the only way to resolve this is to default the member ints, re-add
them to the portchan and then change the mtu on the portchan?
Cheers.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
