it doesn't matter that the second phyical-member of this port channel is disconnected. It is still a member of this bundle. UP mtu of inactive phy-member to 1998 and then up mtu of port-channel. ./Randy
----- Original Message ----- > From: CiscoNSP List <[email protected]> > To: "[email protected]" <[email protected]> > Cc: > Sent: Saturday, July 20, 2013 7:20 PM > Subject: [c-nsp] 7200 - G1 PortChan MTU > > Hi, > > Have a G1, with one active Gig port in a portchan (Second member is currently > disconnected, but is also a Gig port on the G1) - No other ports are > configured > as member ports. > > Gi0/1 (Active member) has an mtu of 1998 - Portchan doesnt have an mtu > configured (So is defaulting to 1500) > > Attempting to change the mtu on the portchan, I get the following: > > (config)#interface Port-channel1(config-if)#mtu 1998 % At least > one member of the channel group 1 is not a 2FE port adapter > > Any suggestions why this is happening? > > And I assume the only way to resolve this is to default the member ints, > re-add > them to the portchan and then change the mtu on the portchan? > > Cheers. > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
