Hi allI have configured QoS between two sites across my backbone , the
classification was done based on telnet traffic and the marking was done based
on the precedence valueI have configured to mark all telnet traffic with
precedence value of 3 and I received it fine without any issues
Now my question is as belowWhen I first wrote telnet 7.7.7.7 and checked the
output of show policy-map interface fastEthernet 1/0 | inc Class|packet
telnet 7.7.7.7 Class-map: PRECEDENCE_3 (match-all) 9 packets, 520
bytesUsername : cisco Class-map: PRECEDENCE_3 (match-all) 16 packets,
905 bytesPassword : cisco Class-map: PRECEDENCE_3 (match-all) 23
packets, 1290 bytesR7>exit Class-map: PRECEDENCE_3 (match-all) 30
packets, 1674 bytes
I want to know what is the methodology used to count these numbers ?
Thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
