On 05/09/13 14:17, Harry Hambi wrote:
Hi all,
Is there a command on the 6500 that will show the Multicast traffic in/out of a
port?. Thanks in advance
What does "show multicast traffic" mean?
If you want to see the raw data packets, you'll need to use SPAN or
R/ERSPAN.
If you want to see IGMP joins, "sh ip igmp" and sub-commands.
If you want to see output routes, "sh ip mroute" and sub-commands.
Be more specific!
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
