Wanted to see the multicast traffic counters incrementing/or not, on a specific port
Rgds Harry Harry Hambi BEng(Hons) MIET Rsgb -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Phil Mayers Sent: 05 September 2013 14:29 To: [email protected] Subject: Re: [c-nsp] Multicast On 05/09/13 14:17, Harry Hambi wrote: > Hi all, > Is there a command on the 6500 that will show the Multicast traffic > in/out of a port?. Thanks in advance What does "show multicast traffic" mean? If you want to see the raw data packets, you'll need to use SPAN or R/ERSPAN. If you want to see IGMP joins, "sh ip igmp" and sub-commands. If you want to see output routes, "sh ip mroute" and sub-commands. Be more specific! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ----------------------------- http://www.bbc.co.uk This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this. ----------------------------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
