On cisco 6500 we're experience the
following problem.
A particular mac-address is seen on
port Te1/1:
xxx#sh mac-address-table dynamic
address xxxx.yyyy.yyyy
Legend: * - primary entry
age - seconds since last seen
n/a - not available
vlan mac address type
learn age ports
------+----------------+--------+-----+----------+--------------------------
Module 1:
*
3 xxxx.yyyy.yyyy dynamic
Yes 0 Te1/1
It’s not seen on the vlan 3:
xxx#sh mac-address-table dynamic
vlan 3
Legend: * - primary entry
age - seconds since last seen
n/a - not available
vlan mac address type
learn age ports
------+----------------+--------+-----+----------+--------------------------
If I do a clear mac-address-table…
xxx#clear mac-address-table dynamic
vlan 3
It’s again seen on the vlan:
xxx#sh mac-address-table dynamic
vlan 3
Legend: * - primary entry
age - seconds since last seen
n/a - not available
vlan mac address type
learn age ports
------+----------------+--------+-----+----------+--------------------------Module
1:
*
3 xxxx.yyyy.yyyy dynamic
Yes 0 Te1/1
But after some time it still
disapper…
xxx#sh mac-address-table dynamic
vlan 3
Legend: * - primary entry
age - seconds since last seen
n/a - not available
vlan mac address type
learn age ports
------+----------------+--------+-----+----------+--------------------------
Any idea ?Tks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
