IOS 12.2.18SXS.15A Which is the difference with "all" keyword ? anyway do not appear as well...
no, syncornization is not enabled and we're not sure to insert during business hours, is traffic disruption forecasted ? The machine is up since 2 years, maybe a good reload ? tks > Subject: Re: [c-nsp] C6500 Switching problem > From: [email protected] > To: [email protected] > CC: [email protected] > Date: Tue, 17 Sep 2013 15:34:44 +0200 > > On Tue, 2013-09-17 at 12:42 +0000, R S wrote: > > On cisco 6500 we're experience the following problem. > > > > A particular mac-address is seen on port Te1/1: > > > > xxx#sh mac-address-table dynamic address xxxx.yyyy.yyyy > ... > > Module 1: > > * 3 xxxx.yyyy.yyyy dynamic Yes 0 Te1/1 > > > > It’s not seen on the vlan 3: > > > > xxx#sh mac-address-table dynamic vlan 3 > ... > > ------+----------------+--------+-----+----------+-------------------------- > > > > If I do a clear mac-address-table… > ... > > What IOS version? What module is Te1/1? > > Does anything change if you use the "all" keyword at the end of the show > command for the VLAN? > > Do you have MAC address table synchronization enabled? > > http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_m1.html#wp1143362 > > -- > Peter > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
