As far as I hear from my CSE, tornado cards will work with older RSPs, but will have performance limitations due low speed fabric connections. Unable to check on my boxes - already upgraded
-- Dmitry Kiselev > From: [email protected] > Date: Thu, 19 Sep 2013 21:05:28 -0700 > To: [email protected]; [email protected] > Subject: Re: [c-nsp] A9K 40G & 100G > > The 9010 with the non-RSP440 is about 184G/slot using both fabrics.. I > am not entirely sure the 100G cards work without the 440... > > Phil From: Jason Lixfeld > Sent: 9/19/2013 23:15 > To: cisco-nsp NSP > Subject: [c-nsp] A9K 40G & 100G > I'm wondering if anyone knows off the top of their head what the > limitations are in terms of 40/100G LC support with RSP4. > > I seem to remember reading something at some point saying if with an > RSP4/8, two are required and both are required to run active/active. > > Whereas with an RSP440, which has more fabric capacity, wouldn't > require a second fabric active at the same time. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
