int g0/x service instance X ethernet encapsulation default Then you would proceed to tie the service instance to a bridge domain or xconnect.
-Steve -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Aaron Sent: Tuesday, October 29, 2013 1:44 PM To: [email protected] Subject: [c-nsp] private/port-based l2vpn service As MEF calls an l2vpn, private/port-based (which carries all, tagged or untagged frames) that arrive at an interface.. EPL, EPLAN, EPTREE, I understand the asr9k would implement this with. Int g0/0/0/0 L2transport With no encap needed. And then you would simply add that interface to the xconnect group:p2p or bg:bd. Question, what is the interface config for doing this exact same thing on an ME3600X ? Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
