Hi Adam, Does the same scenario work for you? I mean BFD between 9K and ME3600X with the same CLNS MTU.
Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group (SPAG) [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: adam vitkovsky <[email protected]<mailto:[email protected]>> Date: Tuesday, November 12, 2013 7:20 AM To: 'Jason Lixfeld' <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] ME3600 BFD session to A9K breaks after upgrade to 15.3(3)S1a Hi Jason, Is the CLNS MTU equal at both ends please? It appears this is again one of the conditions to form ISIS session in 15.3(3)S1 adam _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
