(here's the uncommitted (failing) config... basically I want to shape inbound UDP to 600 mbps. please show me how to accomplish that.)
RP/0/RSP0/CPU0:eng-lab-9k-1(config-pmap-c)#show config policy-map from-internet-parent class class-default service-policy from-internet-child shape average 1 gbps ! end-policy-map ! interface GigabitEthernet0/0/0/5 service-policy input from-internet-parent ! end RP/0/RSP0/CPU0:eng-lab-9k-1(config-pmap-c)#commi % Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors RP/0/RSP0/CPU0:eng-lab-9k-1(config-pmap-c)#show config failed !! SEMANTIC ERRORS: This configuration was rejected by !! the system due to semantic errors. The individual !! errors with each failed configuration command can be !! found below. interface GigabitEthernet0/0/0/5 service-policy input from-internet-parent !!% 'prm_ezhal' detected the 'warning' condition 'Cannot support child/flat shape rate > 128Mbps' ! end RP/0/RSP0/CPU0:eng-lab-9k-1(config-pmap-c)#do sh run class-map class-map match-all udp-attack match protocol udp end-class-map ! -----Original Message----- From: Oliver Boehmer (oboehmer) [mailto:[email protected]] Sent: Tuesday, November 12, 2013 2:23 PM To: Aaron; [email protected] Subject: Re: [c-nsp] shaping > 128 mbps - asr9k >Anyone know how to accomplish shaping traffic at a rate greater than >128 mbps ? > >When I apply the policy-map/class-map to an interface it fails with >this message. > >'Cannot support child/flat shape rate > 128Mbps' can you please share the configuration you are trying to apply, including policy-maps and where you want to apply this? oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
