Hi, we need a FHRP that support IPv4 and IPv6 one some ME3400s in our network. The documentation state that GLBP would do that on the MEs but it seems that it can not be configured on this systems, regardless whether we are using link local or global unicast IPv6 addresses.
me3400g-2cs(config-if)#glbp 1 ip 10.0.0.1 me3400g-2cs(config-if)#glbp 2 ipv6 FE80::1 %FHRP group not consistent with already configured groups on the switch stack I'am wondering if someone can confirm that behavior or have an other solution. If there exist no FHRP for ME3400 that supports IPv4 and IPv6 in that way our last chance is using IPv6 anycast addresses for the IPv6-redundancy but that would imply much slower convergence characteristics :-(. Thx, Gerald _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
