Have you tried to use the same HSRP group number for IP and IPv6 ????
On Wed, Nov 27, 2013 at 12:33 PM, Gerald Krause <[email protected]> wrote: > Hi, > > we need a FHRP that support IPv4 and IPv6 one some ME3400s in our > network. The documentation state that GLBP would do that on the MEs but > it seems that it can not be configured on this systems, regardless > whether we are using link local or global unicast IPv6 addresses. > > me3400g-2cs(config-if)#glbp 1 ip 10.0.0.1 > me3400g-2cs(config-if)#glbp 2 ipv6 FE80::1 > %FHRP group not consistent with already configured groups on the switch > stack > > I'am wondering if someone can confirm that behavior or have an other > solution. > > If there exist no FHRP for ME3400 that supports IPv4 and IPv6 in that > way our last chance is using IPv6 anycast addresses for the > IPv6-redundancy but that would imply much slower convergence > characteristics :-(. > > > Thx, > Gerald > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Best Regards, Jey S. Network Engineer London _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
