Hi
I need to pass a couple of vlans from my switch trunk port to
another switch trunk both of which connected to my 7600 with RSP7203cxl.
Then from the same trunk port I have to get another vlan and assign an
ip address to that vlan.
switchA -------*trunk*--------- 7600 ----------*trunk*-------- switchB
X,Y,Z | Y,Z
|
vlanX (ip address x.x.x.x)
Looking around I see IRB, but its not supported in 7600s according
documentations.
Hope someone could provide assistance or if it is even possible with my
current setup.
Thanks!
--
*Rod Bio *
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
