Hello, what is the best practice for the configuration of L3VPN on Cisco ME3XXX ?
Old Syntax: interface GigabitEthernet0/1 switchport trunk allowed vlan none switchport mode trunk ! service instance 2 ethernet encapsulation dot1q 3 rewrite ingress tag pop 1 symmetric bridge-domain 4 ! interface vlan 4 vrf forwarding L3VPN-1 ip address 2.2.2.1 255.255.255.0 New Syntax: interface GigabitEthernet0/1 switchport trunk allowed vlan none switchport mode trunk ! service instance 2 ethernet encapsulation dot1q 3 rewrite ingress tag pop 1 symmetric ! bridge-domain 4 member GigabitEthernet0/1 service-instance 2 interface vlan 4 vrf forwarding L3VPN-1 ip address 2.2.2.1 255.255.255.0 The new syntax is very much similar to the new syntax for L2VPN, see: http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/design/guide/ME3600x_Design_Guide.pdf I'm soon sending in the field some more ME3600, so I'd like to start right. Best Regards Andrea _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
