Tarko, thank you for this information! I totally overlooked OMCI. So I guess this Huawei GPON ONT in SFP form-factor will be something like RAD MIRICi-155( http://www.radproductsonline.com/support/cs11c01/radcnt/mediaserver/18805_MIRICI-155.pdf) which supports management over web-interface(or maybe even CLI is available) and one could change the serial-number of this ONT? Is the 16 hex characters some sort of industry-standard or is this vendor-specific as well?
regards, Martin On Thu, Feb 27, 2014 at 10:18 PM, Tarko Tikan <[email protected]> wrote: > hey, > > > In summary, is it even technically possible to replace ONT installed by my >> ISP with a Cisco gear? >> > > I'd say "no". Problem lies in missing OMCI interopability between vendors. > Every vendor is using proprietary extensions to OMCI, I've tried mixing > vendors and some ONTs get further in bootup process than others. > > So it's not only authentication you have to worry about, but OMCI as well. > > PS! Huawei will soon have GPON ONT in SFP form-factor available, that > would solve the interopability issue and would allow you to use it in any > SFP compliant device. > > -- > tarko > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
