hey,
So I guess
this Huawei GPON ONT in SFP form-factor will be something like RAD
MIRICi-155(http://www.radproductsonline.com/support/cs11c01/radcnt/mediaserver/18805_MIRICI-155.pdf)
which supports management over web-interface(or maybe even CLI is
available)
SFP form-factor is SFP :)
one could change the serial-number of this ONT? Is the 16
Why do you insist changing this? If you have compatible ONT just let ISP
change the serial in their end (*).
hex characters some sort of industry-standard or is this vendor-specific
as well?
To my best knowledge, it's standard.
(*) In real life, it's not that easy. ONT is provisioned using service
profiles that are defined in OLT. Profile defines things like number of
expected ethernet ports in ONT, number of POTS ports, IP/routing
capabilities, vlan mappings from GEM to ONT ports etc. When you have
mismatch between profile and real life (ie. you replace 4-port ONT with
SFP that says "1 ethernet port" in it's capabilities in OMCI), ONT will
not be provisioned.
(G)PON is not like DSL, don't expect to bring your own ONT.
--
tarko
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
