Hey, Havnt been reading this, but this is my config on a 4g Cisco 819.
event manager applet DIALER event syslog pattern "Cellular0 modem is now DOWN" action 1.0 cli command "enable" action 1.1 cli command "clear dialer" action 1.2 cli command "ping <other side of linknet> repeat 20" action 1.6 syslog msg "DIALER EEM" event manager applet 3G-DOWN event track 2 state down action 1.0 syslog priority informational msg "3G is down" event manager applet ROUTE-DOWN event track 1 state down action 1.0 syslog priority informational msg "Tracked default route is down" event manager applet LOST-WAN-CONNECTIVITY-TRYING-WITH-RELOAD event track 3 state down action 1.0 reload /Peter 2014-03-08 15:11 GMT+01:00 Justin M. Streiner <[email protected]>: > On Sun, 2 Mar 2014, M K wrote: > > Hi allI am trying to do a event manager script that will do the below and >> need some assistanceI want to ping to a specific destination and if the >> ping request timed out for a period of for example 5 minutes , the router >> should be reloaded >> > > I would re-think this approach. > > If you're rebooting routers to 'fix problems' often enough that you need a > way to minimize the effort involved in rebooting them, there is a far more > serious problem lurking in the shadows. > > I would also strongly caution against putting the mechanism that controls > those reboots under the control of something other than a human being who > makes a conscious and informed decision to do so. > > "At 2:14 AM, Skynet becomes self-aware..." > > jms > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
