Hi,
> Hey, > > Havnt been reading this, but this is my config on a 4g Cisco 819. > > event manager applet DIALER > event syslog pattern "Cellular0 modem is now DOWN" > action 1.0 cli command "enable" > action 1.1 cli command "clear dialer" > action 1.2 cli command "ping <other side of linknet> repeat 20" > action 1.6 syslog msg "DIALER EEM" > event manager applet 3G-DOWN > event track 2 state down > action 1.0 syslog priority informational msg "3G is down" > event manager applet ROUTE-DOWN > event track 1 state down > action 1.0 syslog priority informational msg "Tracked default route is > down" > event manager applet LOST-WAN-CONNECTIVITY-TRYING-WITH-RELOAD > event track 3 state down > action 1.0 reload What about just resetting or power cycling the modem instead of reloading? conf t service internal end test cellular 0/1/0 modem-reset [or] test cellular 0/1/0 modem-power-cycle _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
