I don't think there is LDP support in IOS-XR for CsC PE-CE. -- Tassos
Arun Kumar wrote on 10/03/2014 15:43: > Hi All, > > I am trying to configure CSC MPLS VPN on IOS-XR 4.3.4 on ASR 9K as PE. > Currently the configuration is on NPE-G2 and NPE-G1 as PE routers. > > LDP is configured between PE and CE for label exchange and OSPF is the > protocol between PE and CE. > > When I try to configure LDP between ASR9K and CPE, I am not getting LDP as > the option between PE and CE, I am not getting any option of specifying LDP > under the VRF. > > Even the IOS-XR MPLS config guide only talks about BGP based label exchange > between PE and CE on IOS-XR. > > I would like to confirm, can LDP be configured under VRF in ASR9K as PE or > BGP is the only option available? > > thanks in advance > Arun > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
