Are you sure the NPE-G1 interfaces support Auto-MDIX? I suspect they don't.
Try the crossover. -Andy On Wed, Mar 19, 2014 at 8:39 AM, Rob Seastrom <[email protected]> wrote: > > Hi folks, > > I have a small pile of NPE-G1s here, about to upgrade the routing > engines in the VXRs in $BROCOLO in an effort to eke out a couple of > more years from them. > > So, I'm staging and made an interesting discovery: over the built-in > rj45 connectors they will talk to a switch (ex3200) but when cabled to > each other link will not come up. Haven't tried a crossover cable to > see if they'll come up at 100m rather than gigabit, but this is > puzzling to me. > > Tried 12.4 mainline and 15.x. Upgraded the bootloader. No joy. > > Anyone have any ideas or is this a known shortcoming? > > Thanks, > > -r > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
