Hello Have a question about 7609/RSP720 platform marking operation with mixed linecard types. In the setup we are testing uplinks are implemented in ES+ while customer facing interfaces in WS cards.
The egress traffic is forwarded out of the WS cards through a Port-channel interface switchport with 802.1q encapsulation (SVI interface) We would like to be able to have the 802.1p values correspond to the DSCP of the ip packets. Normally for a WS_Card the 802.1p (CoS) value is generated based on the internal DSCP value of the packets (PFC based). I am not sure what is the case when the ingress interface belongs to an ES+ card? (Is an ES+ interface considered untrusted so internal dscp = 0 always?) Currently focused on mls qos commands to solve this but no luck so far. Is this course of action a dead end? Thanks for your help _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
