No , the only option under the interface is authentication keychain command The cryptographic-algorithm MD5 command is under the key chain command , I have tried it but did not work for me !
Date: Tue, 22 Apr 2014 13:16:14 -0400 Subject: Re: [c-nsp] EIGRP Authentication on IOS XR From: [email protected] To: [email protected] CC: [email protected] I think the next line after "authentication keychain...." is "cryptographic-algorithm MD5" On Tue, Apr 22, 2014 at 10:55 AM, M K <[email protected]> wrote: Hi all I am facing an issue when configuring EIGRP authentication between IOS and IOS XR R1#sh run | sec key chain key chain KEY key 1 key-string cisco R1#sh run int f0/0 | inc authen ip authentication mode eigrp 1 md5 ip authentication key-chain eigrp 1 KEY RP/0/0/CPU0:XR1#sh run key chain Tue Apr 22 17:54:14.480 UTC key chain KEY key 1 key-string password cisco router eigrp EIGRP_PROCESS address-family ipv4 autonomous-system 1 interface Loopback0 ! interface GigabitEthernet0/0/0/0 authentication keychain KEY Under the interface GigabitEthernet0/0/0/0 located under the EIGRP process , I did not find an option for choosing MD5 Any ideas? Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
