Hi, What does the debug says please? adam > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > M K > Sent: Tuesday, April 29, 2014 10:47 AM > To: Oliver Boehmer (oboehmer); Pete Lumbis > Cc: [email protected] > Subject: Re: [c-nsp] EIGRP Authentication on IOS XR > > Hi and sorry for the late reply > I have tried it and did not work the relation kept down > > BR, > > > From: [email protected] > > To: [email protected]; [email protected] > > CC: [email protected] > > Subject: Re: [c-nsp] EIGRP Authentication on IOS XR > > Date: Wed, 23 Apr 2014 21:40:00 +0000 > > > > can you add "send-lifetime .." to the key? It might not be active > > without it.. > > > > key chain KEY > > key 1 > > key-string password cisco > > cryptographic-algorithm md5 > > send-lifetime 01:01:00 january 01 2014 infinite > > > > > > > > -----Original Message----- > > From: M K <[email protected]> > > Date: Wednesday, 23 April 2014 16:49 > > To: Pete Lumbis <[email protected]> > > Cc: "[email protected]" <[email protected]> > > Subject: Re: [c-nsp] EIGRP Authentication on IOS XR > > > > >No , the only option under the interface is authentication keychain > > >command The cryptographic-algorithm MD5 command is under the key > > >chain command , I have tried it but did not work for me ! > > > > > >Date: Tue, 22 Apr 2014 13:16:14 -0400 > > >Subject: Re: [c-nsp] EIGRP Authentication on IOS XR > > >From: [email protected] > > >To: [email protected] > > >CC: [email protected] > > > > > >I think the next line after "authentication keychain...." is > > >"cryptographic-algorithm MD5" > > > > > > > > >On Tue, Apr 22, 2014 at 10:55 AM, M K <[email protected]> wrote: > > > > > >Hi all > > > > > >I am facing an issue when configuring EIGRP authentication between > > >IOS and IOS XR > > > > > > > > > > > >R1#sh run | sec key chain > > > > > >key chain KEY > > > > > > key 1 > > > > > > key-string cisco > > > > > > > > > > > >R1#sh run int f0/0 | inc authen > > > > > > ip authentication mode eigrp 1 md5 > > > > > > ip authentication key-chain eigrp 1 KEY > > > > > > > > > > > >RP/0/0/CPU0:XR1#sh run key chain > > > > > >Tue Apr 22 17:54:14.480 UTC > > > > > >key chain KEY > > > > > > key 1 > > > > > > key-string password cisco > > > > > > > > > > > >router eigrp EIGRP_PROCESS > > > > > > address-family ipv4 > > > > > > autonomous-system 1 > > > > > > interface Loopback0 > > > > > > ! > > > > > > interface GigabitEthernet0/0/0/0 > > > > > > authentication keychain KEY > > > > > > > > > > > >Under the interface GigabitEthernet0/0/0/0 located under the EIGRP > > >process , I did not find an option for choosing MD5 > > > > > > > > > > > >Any ideas? > > > > > > > > > > > >Thanks > > > > > > > > > > > > > > > > > > > > > > > >_______________________________________________ > > > > > >cisco-nsp mailing list [email protected] > > > > > >https://puck.nether.net/mailman/listinfo/cisco-nsp > > > > > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > > > > > > >_______________________________________________ > > >cisco-nsp mailing list [email protected] > > >https://puck.nether.net/mailman/listinfo/cisco-nsp > > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
