I see in rfc4761 type configs for bgp signaled vpls that they make use of
"bgp graceful-restart"
If my pe's all neighbor only with a route reflector, must I also enable
graceful-restart on the route reflector as well ?
I did it on my pe's only at this point and I see that the neighbor sessions
have graceful advertised, but not received.
RP/0/RSP0/CPU0:eng-lab-9k-1#sh bgp vpnv4 u neighbors | in race
Tue Apr 29 09:37:35.931 CDT
Graceful restart is enabled
Graceful Restart capability advertised
Graceful Restart capability advertised
Graceful Restart capability advertised
Graceful restart is enabled
Graceful Restart capability advertised
Graceful Restart capability advertised
Graceful Restart capability advertised
eng-lab-3600-2#sh bgp vpnv4 unicast all neighbors | in race
Graceful Restart Capability: advertised
Graceful-Restart is enabled, restart-time 120 seconds, stalepath-time 360
seconds
Graceful Restart Capability: advertised
Graceful-Restart is enabled, restart-time 120 seconds, stalepath-time 360
seconds
Aaron
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
