Seeing as how the ME3600 has no useful remote span capabilities, I just tried to do a ghetto pseudowire span:
1. Connect a trunk port from some STP, PVST+ and CDP spewing test switch to gi0/1 on local ME3600 2. Monitor source gi0/1 on local ME3600 3. Monitor destination gi0/2 on local ME3600 4. Loop back gi0/2 to gi0/3 on local ME3600 5. EoMPLS Xconnect gi0/3 on local ME3600 to gi0/4 on remote ME3600 6. Connect wireshark box to gi0/4 of remote me3600 At first glance, this seemed to work ok. On the wireshark box, I was able to see STP and PVST BPDUs on multiple VLANs and CDP frames. What else should I check to make sure this isn't some fluke? ... Or has this been a common workaround that has been known to work perfectly since the dawn of time and I'm just late to the party? Sent from my iPhone _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
