If you have a spare 720, you should be able to boot the spare perform a switch to the spare-sup, replace the main one, and switch back. That way you should keep the box running with all configuration and the indexes
Kind regards, Sibbi On 19.5.2014 15:56, "Antonio Soares" <[email protected]> wrote: >Hello guys, > >I need to replace a few SUP720s. In order to keep the same interfaces >indexes, the only way I see to achieve that easily is moving the >nvram:ifIndex-table from the old SUP to the new SUP. Does it work ? > >This document says that the file can be downloaded and viewed: > >http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-pro >to >col-snmp/28420-ifIndex-Persistence.html > >But nothing about moving it to a new SUP/Router. > > >Thanks. > >Regards, > >Antonio Soares, CCIE #18473 (RS/SP) >[email protected] >http://www.ccie18473.net > > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
