Thanks for the feedback. That's a good option. But I will try to move the file from the old SUP to the new SUP to see what happens. I will update the list with my findings.
Someone asked the same thing a few years ago: http://www.gossamer-threads.com/lists/cisco/nsp/99968 In fact, in a situation where you only have one SUP and it gets faulty, the procedure I mentioned would be perfect. Regards, Antonio Soares, CCIE #18473 (RS/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: Sigurbjörn Birkir Lárusson [mailto:[email protected]] Sent: segunda-feira, 19 de Maio de 2014 17:10 To: Antonio Soares; [email protected] Subject: Re: [c-nsp] ifIndex-table If you have a spare 720, you should be able to boot the spare perform a switch to the spare-sup, replace the main one, and switch back. That way you should keep the box running with all configuration and the indexes Kind regards, Sibbi On 19.5.2014 15:56, "Antonio Soares" <[email protected]> wrote: >Hello guys, > >I need to replace a few SUP720s. In order to keep the same interfaces >indexes, the only way I see to achieve that easily is moving the >nvram:ifIndex-table from the old SUP to the new SUP. Does it work ? > >This document says that the file can be downloaded and viewed: > >http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management- >pro >to >col-snmp/28420-ifIndex-Persistence.html > >But nothing about moving it to a new SUP/Router. > > >Thanks. > >Regards, > >Antonio Soares, CCIE #18473 (RS/SP) >[email protected] >http://www.ccie18473.net > > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
