On 05/21/2014 11:38 PM, Mike wrote:
Howdy,
So I have a whole pile of new Cisco ASR1k and ME3600's which are
intended for installation in a telco environment and all have -48vdc
power supplies. There is a necessary detour however, I need to set these
up in my lab environment so I can test configurations and get things as
dialed-in as possible in advance of physical installation out at the
telco locations. I don't want to buy AC power supplies for all of this
just for testing.... there has to be a suitable -48vdc power system
available somewhere that would be suitable to plug into my ac power and
have enough juice to run all of this? Does anyone have any recommendations?
Thanks.
Mike-
We do a fair amount of Telco work and need to stage systems in the lab.
We picked up one of these:
http://www.ebay.com/itm/Kepco-Rackmount-DC-Power-Supply-48VDC-Volt-22A-Amp-PRR-48-22M-/141027831504?pt=US_Server_Power_Supplies&hash=item20d5e9eed0
That, along with one of these gets it done:
http://www.ebay.com/itm/Apex-AX-010221-00-20-Slot-Fuse-Alarm-Panel-/181296768483?pt=LH_DefaultDomain_0&hash=item2a362125e3
If you are patient you can find much better prices than these particular
items.
Steve
--
--------------------------------------------------------------------------
Steven Saner <[email protected]> KD0IJP
Andover, Kansas USA
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
