On 22/05/14 14:38, Mike wrote: > So I have a whole pile of new Cisco ASR1k and ME3600's which are > intended for installation in a telco environment and all have -48vdc > power supplies. There is a necessary detour however, I need to set these > up in my lab environment so I can test configurations and get things as > dialed-in as possible in advance of physical installation out at the > telco locations. I don't want to buy AC power supplies for all of this > just for testing.... there has to be a suitable -48vdc power system > available somewhere that would be suitable to plug into my ac power and > have enough juice to run all of this? Does anyone have any recommendations?
The magic search term is "48 rectifier" (actually -48, but you can't search for that on eBay). Tyco & Eltek are two of the common vendors. I presume you've actually confirmed that the sites are native-DC, that's getting increasingly rare.
signature.asc
Description: OpenPGP digital signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
