Hello everyone from the past few hours I am stuck with trouble shooting flex stack on 2960
i have two Ws-c2960s-24ts-l running c2960s-universalk9-mz.150-2.SE5 with flex stack module i have a flex stack cable given in the box labeled as Leoni the flex stack module is discovered and i have cleared the configs and patches the modules and powered both of them the flex stack ports stays down all the time the boot log as follows Mar 30 01:29:43.839: %SYS-5-CONFIG_I: Configured from memory by console Mar 30 01:29:43.960: %STACKMGR-5-SWITCH_READY: Switch 1 is READY Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN Mar 30 01:29:44.426: %PLATFORM-6-FLEXSTACK_INSERTED: FlexStack module inserted in Switch 1. Mar 30 01:29:44.573: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY Switch # Port 1 Port 2 -------- ------ ------ 1 Down Down Please suggest _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
