Hi nick yes we connected 1-2 and 2-1 both switches says down down we tried enabling and disabling the stack ports too
On Wednesday, June 11, 2014 5:33 PM, Nick Adams <[email protected]> wrote: bad flexstack cable? bad port in the flexstack module? did you connect both flexstack cables? (1 -> 2 and 2 -> 1) On Jun 11, 2014, at 7:05 AM, naresh reddy <[email protected]> wrote: > Hello everyone > > from the past few hours I am stuck with trouble shooting flex stack on 2960 > > i have two Ws-c2960s-24ts-l running c2960s-universalk9-mz.150-2.SE5 with flex > stack module > i have a flex stack cable given in the box labeled as Leoni > > the flex stack module is discovered > and i have cleared the configs and patches the modules and powered both of > them > > the flex stack ports stays down all the time > the boot log as follows > > Mar 30 01:29:43.839: %SYS-5-CONFIG_I: Configured from memory by console > Mar 30 01:29:43.960: %STACKMGR-5-SWITCH_READY: Switch 1 is READY > Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has > changed to state DOWN > Mar 30 01:29:43.965: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has > changed to state DOWN > Mar 30 01:29:44.426: %PLATFORM-6-FLEXSTACK_INSERTED: FlexStack module > inserted in Switch 1. > Mar 30 01:29:44.573: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY > Switch # Port 1 Port 2 > -------- ------ ------ > 1 Down Down > Please suggest > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
