Just breaking ground with some 4500X switches... and was curious... With other Catalysts the switches are often oversubscribed... at least the uplinks... but there were platform specific commands to determine which ports were mapped to which ASICs and you could try to optimize your loads across the physical ASICs...
Is this still the case with the 4500X? It can't be line rate (not at 32 ports x 10Ggps)... so what's the breakdown on bandwidth here? Jeff _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
